Menu

TOPIC: Plumbing

Back to Blog Posts

Missing Revit MEP Family Templates in 2012???

Yesterday I read a couple of blog posts that I must share with my fellow Revit users…

First and foremost, as the MEP guy here at Microsol Resources, I was focusing on MEP-related content and found this MEP Connectors and Revit Architecture post by Doug Bowers last November.  I started reading it, but before I could finish the first paragraph, something caught my eye…”A previous blog post lists each of the family templates installed with the various Revit packages,” so I clicked through and am so glad I did!  The post from October 2011 is entitled Templates Provided with Revit 2012 and contains a link to a PDF that I feel is a very valuable reference for any Revit 2012 user.

As the MEP guy, I was shocked to learn that Revit MEP 2012 does not include many MEP-specific family templates that a MEP user might expect to find in his/her product.  You can review the PDF for a complete comparison matrix, but the following is worth mentioning: Electrical Equipment, Electrical Fixture, Lighting Fixture, Linear Lighting Fixture, Mechanical Equipment, Plumbing Fixture, Specialty Equipment, and Spot Lighting Fixture.

Once I reviewed Doug’s list, I decided to compare the content of all Revit 2011, 2012, and 2013 products.  What I found, and what makes this even more interesting, is that the family templates listed above were included with 2011!  So, what happened in 2012?  I can’t answer that question, but the good news is the templates are back in 2013.  See below for a list of total family templates in each product, at least by my count.  Note that this list does not include Annotation, Conceptual Mass, Titleblock, or Project templates:

  • Revit Architecture 2011 – 64
  • Revit Architecture 2012 – 62
  • Revit Architecture 2013 – 65
  • Revit MEP 2011 – 78
  • Revit MEP 2012 – 43
  • Revit MEP 2013 – 76
  • Revit Structure 2011 – 34
  • Revit Structure 2012 – 35
  • Revit Structure 2013 – 68

If you are a 2012 user and still have 2011 loaded, you can basically copy the 2011 family RFT files from the C:ProgramDataAutodeskRME 2011Imperial Templates folder and paste them into the C:ProgramDataAutodeskRME 2012Family TemplatesEnglish_I folder for your 2012 product.  Granted the 2011 templates will need to be upgraded in 2012 when you elect to use them, but that’s no biggie and something that can be done as needed!

Read More